RIP Basic Configuration

RIP Basic Configuration
> Task 1  >  Configure Basic IP Setting on both R1 and R2 routers.
Router(config)# host R1
 R1(config)# int lo0
 R1(config-if)# ip add 1.1.1.1 255.255.255.255
 R1(config-if)# int fa0/0
 R1(config-if)# ip add 12.1.1.1 255.255.255.0
 R1(config-if)# no shut
Router(config)# host R2
 R2(config)# int lo0
 R2(config-if)# ip add 2.2.2.2 255.255.255.255
 R2(config-if)# int fa0/0
 R2(config-if)# ip add 12.1.1.2 255.255.255.0
 R2(config-if)# no shut
R1# ping 2.2.2.2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 2.2.2.2, timeout is 2 seconds:
.....
Success rate is 0 percent (0/5)
R1# sh ip route rip
R1#
> Task 2  >  Configure RIPv2 on both R1 and R2 routers. R1 can reach R2's loopback address and R2 also can reach R1's loopback.
 R1(config-if)# router rip
 R1(config-router)# version 2
 R1(config-router)# network 1.1.1.0
 R1(config-router)# network 12.1.1.0
 
 R2(config-if)# router rip
 R2(config-router)# version 2
 R2(config-router)# network 2.2.2.0
 R2(config-router)# network 12.1.1.0
R1# sh ip route rip
R 2.0.0.0/8 [120/1] via 12.1.1.2, 00:00:05, FastEthernet0/0
R1# ping 2.2.2.2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 2.2.2.2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 0/0/1 ms
R1#

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.