Task 1 > Configure devices’ name and IP setting of all routers and Switch (ISP Switch).
Task 2 > Configure to get routers’ public IP addresses connectivity each other.
Task 3 > Create Tunnel 1 between R1 and R2. If successful, tunnel is Up and should reach each other tunnel IP.
Task 4 > Create Tunnel 2 between R1 and R3. If successful, tunnel is Up and should reach each other tunnel IP.
Task 5 > Router should get connection each other private LAN networks. In this case, only static routing is allowed to configure.
Task 6 > To use routing protocols instead of Static, delete static route entries and make sure no static route exist in routers.
Task 7 > Set up Dynamic Routing protocol EIGRP for LAN connections of Routers.
You finished your Lab.
Download Lab Solution
Nyi Nyi Min, CCNP, CCDP, is a Instructor and Course
Developer on CCNA, CCNP, CCIE. He holds multiple
professional certifications from Cisco Juniper,
Microsoft, VMware, etc.. and worked and supported
several enterprise networks. He is Founder of
IP6 Networks (www.ip6networks.com), where he currently teaches
CCNA, CCNP Classes.